The use and maintenance of shower auxiliary equipment mainly includes the use and maintenance techniques of bathroom shower heads, card shower controllers and other equipment.
Use and maintenance of bathroom shower heads
Usage method:
Before use, make sure that the shower head is firmly connected to the water pipe and there is no looseness. Turn on the hot and cold water switches of the faucet and adjust to the appropriate water temperature. Usually, adjust the water temperature to a slightly lower level first, and then gradually increase the proportion of hot water to avoid being scalded by hot water at the beginning.
When holding the shower head, adjust the angle and spray mode of the shower head according to personal needs. Nowadays, shower heads generally have a variety of spray modes, such as concentrated spray, soft spray, massage mode, etc. If it is a shower head fixed on the wall, you can enjoy different spray angles by moving your body.
Maintenance tips:
After use, turn off the faucet in time to avoid wasting water resources. When the shower head is not used for a long time, the water in the shower head should be drained to prevent the accumulation of scale and the growth of bacteria.
It is very important to clean the shower head regularly. The shower head can be disassembled and soaked in white vinegar or special detergent to remove scale and stains. When cleaning, be careful not to use sharp objects to scratch the surface of the shower head to avoid damaging the shower head.
Use and maintenance of card shower controller
Basic concepts and functions:
Billing function: The card shower controller can accurately bill according to the pre-set rate, using water consumption or shower time as the billing unit. For example, the fee is calculated according to how much money per liter of water or how much money per minute of shower.
Water control function: The time and water consumption of each shower can be limited. For example, when the user swipes the card to start the shower, the controller will start counting. Once the set maximum shower time or water consumption is reached, the valve will automatically close and stop the water discharge.
User management function: It is convenient to manage the card information of different users, and new cards can be issued, lost cards can be reported, and cards can be replaced. Different shower permissions and rate discounts can be set for different user groups. Installation and maintenance:
Installation location: The card-swipe shower controller should be installed near the shower head to facilitate the user's card-swipe operation, and pay attention to waterproofing. The sensing area of the card reader must ensure that the card information can be read normally. Pipeline connection: When connecting the water pipe, ensure that the valve is installed in the correct direction and the water flow direction is consistent with the direction marked on the valve. The line connection with the controller must also be carried out in accordance with the requirements of the manual to avoid problems such as line short circuit. Regular inspection: Regularly check whether the sensing function of the card reader, the opening and closing of the valve, and the billing function of the controller are normal.







