Shower auxiliary equipment mainly includes the following components:
Shower faucet: The shower faucet is the core component of the shower head, which controls the flow and outlet of water. It is usually composed of a water distributor, a handle and a main body. Modern shower faucets mostly use ceramic valve cores, which are wear-resistant and have a long service life.
Valve core: The valve core is a key component for controlling water flow. Modern shower faucets mostly use ceramic valve cores, which are wear-resistant and have a long service life.
Shower pipe: A hard pipe connecting the faucet and the top spray shower head, mostly made of copper, stainless steel, etc. The liftable shower head will be installed above the shower pipe. The suitable height is 30 cm above the head.
Shower hose: A soft pipe connecting the handheld shower head and the faucet, which is elastic and made of stainless steel cladding, inner pipe and connector.
Top spray shower head: Top spray shower heads are available in square and round shapes, with a diameter generally between 200-250mm, and made of ABS, all copper, stainless steel, etc.
Handheld showerhead: Handheld showerheads are convenient and quick, and are generally made of plastic.
Lower faucet: It can be rotated and leaned against the wall when not in use. It is reasonably designed and practical.
Mounting base: It is used to fix the showerhead to ensure its stability and safety.
Installation steps:
Clean the installation area to ensure that there are no impurities.
Fix the elbow to the water outlet joint on the wall and wrap it with a plastic bag to prevent water leakage.
Installation flange into the elbow outlet and rotate it to fit the wall.
Install plastic gasket, fixing base and screw cap.
Connect the handheld showerhead to the hose, and connect the other end of the hose to the hot and cold faucet switch.
Place the handheld showerhead on the fixing base to complete the installation.







